[cisco-voip] CME-SRST question

[Ryan Huff]

Can you send us the output of:

- # sh run | sec voice service voip|voice register|dial-peer voice|tftp-server

-# dir

Additional questions:

- What is the model of SIP phone?
- What CUBE hardware platform?
- What IOS / IOS-XE code version?

Thanks,

Ryan

On Sep 3, 2016, at 4:34 PM, Ahmed Abd EL-Rahman <Ahmed.Rahman at bmbgroup.com<mailto:Ahmed.Rahman at bmbgroup.com>> wrote:

Dear Gents,

I have a setup of CUCM 10.5 in a central site with a router in a branch site, phones in branch are registered with the central site CUCM and in case of WAN failure the branch site router should handle the branch phones till the WAN is up again, I have configured the branch router with CME-SRST configurations which is working fine with SCCP phones and all tests were successfully during WAN outage, my issue it with branch SIP phone which are not able to register to the CME-SRST router during WAN outage despite I have followed many configurations scenarios for SIP phones including global register configurations.

So does anyone have a working scenario configurations for CME-SRST (not unified SRST) working with SIP phones.






Best Regards

Ahmed Abd EL-Rahman
Senior Network Engineer

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160903/2722917a/attachment.html>