[cisco-voip] Device Registration via MRA and CMG Failover

[Anthony Holloway]

I only found the Jabber was unsupported. No documentation on the phones.
Also, we are not using CE.
On Fri, Jan 13, 2017 at 11:56 AM Ankur Srivastava <ansrivastava at linkedin.com>
wrote:

> Hi Anthony,
>
> In my deployment , we are using CE devices like dx, sx and mx devices. And
> i have seen these devices failover to the backup cucm a couple of times. I
> did not know this was unsupported.
>
> Just to clarify i dont have Jabber over MRA due to 2-factor requirements
> which i have not been able to iron out, so cant comment on this behavior on
> Jabber.
>
> Regards,
> Ankur
>
> On Jan 13, 2017 00:13, "Anthony Holloway" <avholloway+cisco-voip at gmail.com>
> wrote:
>
> *Setup*
> Single Expressway-E (X8.7)
> Single Expressway-C (X8.7)
> CUCM Pub (11.0)
> CUCM Sub (11.0)
> CMG Sub > Pub
>
> *Execute*
> All desk phones and soft-phones are currently registered to CUCM Sub
> Drop CUCM Sub for maintenance
> All desk phones and soft-phones unregister and stay this way
> Switch CMG to Pub > Sub
> All desk phones and soft-phones register to CUCM Pub
>
> According to the Jabber 11.8 deployment guide, there is a table which says
> failover/high availability is not yet supported for audio/video.
>
>
> http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_8/cjab_b_planning-guide-jabber-118/cjab_b_planning-guide-jabber-118_chapter_010.html#CJAB_RF_S96EC4E9_00
>
> None of the 7800/8800/DX/Expressway/MRA documentation states that this is
> unsupported, however, I may just be over looking it.
>
> Can anyone help me find that info, or have some personal experience to
> share?
>
> Thanks.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170113/7a017a1c/attachment.html>