[cisco-voip] DX80 issues.

[naresh rathore]

hi,



I am facing two issues with DX80.



  1.  First, video call is not successful with DX80. when i check self view (while not on call).there is nothing. so i think there can be issue with the camera. video call is enabled on Device > Phone and between video and phone device pool, the codec is G711, maximum session bit rate for video calls: 384kbps, maximum session bit rate for immersive video calls: 1024kbps


      2. Second, is the upgrade (may be upgrade will resolve camera issue) . Currently DX80 is on android firmware and the required firmware is also android. I use ftp/sftp to upload the file on both cucm, on one cucm tftp service is active while on another cucm (sub), tftp is not active but i uploaded file on both of them and can see the .load file on tftp file management. but see the following status after upgrade (upgrade failed).


Registration:   Registered with Cisco Unified Communications Manager CUCM02
IPv4 Address:   x.x.x.x<http://10.163.167.14/>
Active Load ID: sipdx80.10-2-2-23
Inactive Load ID:       INVALID
Download Status:        Failed
Requested Load ID:      sipdx80.10-2-4-99
Download Server:        10.163.72.100
Inactive Load Failure Reason    File Not Found

Any suggestions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170616/14c69da4/attachment.html>