[cisco-voip] DX80 issues.

[Brian Meade]

You can try restarting TFTP.  Also see if you can download the .loads file
with a TFTP Client.

On Fri, Jun 16, 2017 at 2:13 AM, naresh rathore <nareh84 at hotmail.com> wrote:

> hi,
>
>
>
> I am facing two issues with DX80.
>
>
>
>
>    1. First, video call is not successful with DX80. when i check self
>    view (while not on call).there is nothing. so i think there can be issue
>    with the camera. video call is enabled on Device > Phone and between video
>    and phone device pool, the codec is G711, maximum session bit rate for
>    video calls: 384kbps, maximum session bit rate for immersive video calls:
>    1024kbps
>
>
>
>       2. Second, is the upgrade (may be upgrade will resolve camera
> issue) . Currently DX80 is on android firmware and the required firmware is
> also android. I use ftp/sftp to upload the file on both cucm, on one cucm
> tftp service is active while on another cucm (sub), tftp is not active but
> i uploaded file on both of them and can see the .load file on tftp file
> management. but see the following status after upgrade (upgrade failed).
>
>
> *Registration:* Registered with Cisco Unified Communications Manager
> CUCM02
> *IPv4 Address:* x.x.x.x <http://10.163.167.14/>
> *Active Load ID:* sipdx80.10-2-2-23
> *Inactive Load ID:* INVALID
> *Download Status:* Failed
> *Requested Load ID:* sipdx80.10-2-4-99
> *Download Server:* 10.163.72.100
> Inactive Load Failure Reason File Not Found
> Any suggestions.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170616/39ad0648/attachment.html>