[cisco-voip] Deploy Jabber as Full UC and Softphone only

[Brian Meade]

You should just be able to not enable the user for IM&P and it will switch
to phone only mode automatically.

On Fri, Jun 16, 2017 at 4:38 AM, Reto Gassmann <voip at mrga.ch> wrote:

> Hello Group
>
> We have a UC Cluster running on 10.5 and want to deploy Jabber for some
> users. Some of them will use Jabber as full UC (IM, chat and softphone)
> other will only use Jabber as Softphone only.
>
> I found a jabber-config.xml config example where there is a Questionnair
> Section and in there the a Attribute <WhichProductMode>PhoneOnly</
> whichProductMode>.
> However I can only have one Jabber-config.xml. Is there an other way to
> tell Jabber which mode to be used? (Installation, UC Service Profile, ...)?
>
> Thanks a lot
> Regards Reto
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170616/0b71c6e6/attachment.html>