[cisco-voip] FXO port to Viking C-1000B door entry controller

[Brian Meade]

We'd need some debugs to see what is happening like "debug vpm signal" to
see what tones are sent on the line.

On Tue, Mar 28, 2017 at 9:35 AM, Kevin via cisco-voip <
cisco-voip at puck.nether.net> wrote:

>
> Hi,
>
> I was wondering if a solution was found.
>
> I have a similar issue. We have a Viking gate opener that was connected to
> a Nortel Option 11c analog port. We have migrated to a CUCM. The local
> analog port is now an FXS port on a Cisco 4331 router using MGCP. The call
> box at the gate works in that I can call from the call box to a Cisco IP
> phone and a two way connection works. But when the code is entered on the
> IP phone to open the gate, the call drops and the gate does not open.
>
> Thanks in advance.
> Kevin
> Sent from my iPhone
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170328/dd0db199/attachment.html>