[cisco-voip] FXO port to Viking C-1000B door entry controller

[Carlo Calabrese]

I take it you press 6 or something to allow the gate to open?  can you send a copy of the MGCP statements on the gateway?
looking to see what the dtmf-relay is set to.
mgcp dtmf-relay voip codec all mode nse 

    On Tuesday, March 28, 2017 6:46 AM, Brian Meade <bmeade90 at vt.edu> wrote:
 

 We'd need some debugs to see what is happening like "debug vpm signal" to see what tones are sent on the line.
On Tue, Mar 28, 2017 at 9:35 AM, Kevin via cisco-voip <cisco-voip at puck.nether.net> wrote:


Hi,

I was wondering if a solution was found.

I have a similar issue. We have a Viking gate opener that was connected to a Nortel Option 11c analog port. We have migrated to a CUCM. The local analog port is now an FXS port on a Cisco 4331 router using MGCP. The call box at the gate works in that I can call from the call box to a Cisco IP phone and a two way connection works. But when the code is entered on the IP phone to open the gate, the call drops and the gate does not open.

Thanks in advance.
Kevin
Sent from my iPhone
______________________________ _________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/ mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170328/28127dd8/attachment.html>