[cisco-voip] no ringback tone for incoming calls

[naresh rathore]

hi,



I am facing the issue in which when i call internal trigger number (CUCM ---> UCCX), i can hear the ringback tone. but when i call from mobile to the voicegateway (mobile -------ISDN-----> voice gateway ------H323 --------------> CUCM) i cant hear ringback tone when i select the option in IVR.


progress indicator setup 3 is already configured. see the following dialpeer on the voice gateway


rap-adl-rc01#sh run | sec dial-peer
dial-peer voice 2001 voip
 description Publisher
 translation-profile incoming Outside-Lines-Inbound
 preference 2
 destination-pattern 888..
 progress_ind setup enable 3
 session target ipv4:<cucm pub>
 incoming called-number .
 voice-class codec 10
 voice-class h323 10
 dtmf-relay cisco-rtp h245-signal h245-alphanumeric
 no vad
dial-peer voice 2002 voip
 description Subscriber
 translation-profile outgoing Outside-Lines-Outbound
 preference 1
 destination-pattern 888..
 progress_ind setup enable 3
 session target ipv4:<cucm-sub>
 incoming called-number .
 voice-class codec 10
 voice-class h323 10
 dtmf-relay cisco-rtp h245-signal h245-alphanumeric


Regards


Naresh Rathore

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170504/62fc738f/attachment.html>