[cisco-voip] Cube configuration for CenturyLink Sip Trunk

Ben Amick bamick at HumanArc.com
Thu Jan 11 15:05:20 EST 2018


We have a CenturyLink IQ SIP trunk as well, and an efax system set up to our CUCM over SIP trunk, and then CUCM handles the signaling to the gateway.

I didn’t set it up originally so I don’t know what pains we had with it, but we do have a slightly altered version of the below line in our gateway config under both voip service voip and the some of the inbound and outbound dial peers:
“fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw”

It works well enough, but we do have some periodic but common fax issues still. But I think that’s more of a carrier issue than our side, and we pump out way more faxes in a day than most companies.

Ben Amick
Unified Communications Analyst

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of 'Jonatan Quezada'
Sent: Thursday, January 11, 2018 2:50 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cube configuration for CenturyLink Sip Trunk

Hola Cisco Ninjas,

We cut over to a CenturyLink IQ private SIP trunk, and we are seeing that FAXing is not functional like before. Part of the reason we feel is that the ATA and the fax devices location are the older ones, they are ATA186, I have tried

The provider says they do passthrough, but we can only receive. We developed a workaround with a seperate routeList, and Group to use the T1's we migrated from.

Has anyone successfully configured Fax with centuryLinkSip Trunk?

The TAC team mentioned that I should use this command  in the dial peers

fax protocol t38 nse ls-redundancy 0 hs-redundancy 0 fallback pass-through g711u’.


before I mess with my dial peers I want to see if there are field tested methods that have been successful.

What is the difference between configuring FAX globally on the voice service VoIP area of the configuration vs the dial peer side. I already have the above command configured globally. and fax is still receive only. I cant send out over the trunk.  thoughts concerns? ideas greatly appreciated



Johnny Q
Voice Technology Analyst - TelNet
Chemeketa Community College
Johnny.Q at chemeketa.edu<mailto:Johnny.Q at chemeketa.edu>
Building 22 Room 131
Work 5033995294
Mobile 9712182110
SIP 5035406686


Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180111/8db2561b/attachment.html>


More information about the cisco-voip mailing list