[cisco-voip] Jabber Client - How to make the SIP URI be the *default* for "green button" click to dial.

[Brian V]

I think you're correct.  CUCM is for sure a numeric first platform.  To my
knowledge to have a registered endpoint of any kind, it has to have a
numeric DN assigned.  I don't know of a way to only have a SIP URI.

I don't think there is a way to impact the order.  Normally the SIP URI
would match the extensions and it wouldn't matter. But during my migration
they will not be the same until we're all done moving the customer off a
legacy Avaya and Skype4B system

What makes it more confusing is if you have Cloud registered Jabber (legacy
Webex messenger, not Spark/Teams) it lists the SIP URI first and then the
numeric extensions.





On Wed, Jul 18, 2018 at 12:23 PM, Anthony Holloway <
avholloway+cisco-voip at gmail.com> wrote:

> My Spidey Sense tells me that CUCM is a numeric first application, and
> that URIs are secondary add-ons, therefore, this wouldn't be possible
> without eliminating the DN all together.  However, that would only work for
> non-human accounts, e.g., video room systems which only require a URI.
> Humans typically will have a DN and a URI.
>
> On Wed, Jul 18, 2018 at 10:15 AM Brian V <bvanbens at gmail.com> wrote:
>
>> IMP 12.0 on-prem with Jabber for Windows 12.0 (But I think this would
>> apply to most all current releases of IMP/Jabber)
>>
>> Using only UDS directory with LDAP sync on back end. LDAP directory is
>> mapping *telephoneNumber* to *Phone Number* and *mail* to *Directory URI*
>>
>> The client seems to default to using the Phone Number as the default
>> selection for the green-button click-to-dial function. I have a need to
>> make this default to the SIP URI.
>>
>> I've checked over the parameters available here
>>
>> https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/
>> 12_0/cjab_b_parameters-reference-guide-for-cisco_12.html
>>
>> but not finding anything in the XML parameters that would seem to
>> influence this.
>>
>> I can successfully click-to-dial either the Phone Number or the SIP URI.
>> I need to make the SIP URI be the *default* for click-to-dial.
>>
>> Tested with both a client configured with only a softphone, and client
>> configured for only desk phone control.  No impact on the order.  Always
>> selects SIP URI first.
>>
>> I'm in a UC migration situation and the *Phone Number* for users
>> (imported from LDAP) may not be accurate (not reachable) during the
>> migration, but the SIP URI will be accurate and reachable. Trying to not
>> have to instruct users select the SIP URI manually when dialing from Jabber
>>
>> Screen capture to illustrate what I'm trying to do.
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180718/2fc49ddf/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 34264 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180718/2fc49ddf/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 138066 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180718/2fc49ddf/attachment-0001.png>