[cisco-voip] UCCE: How to match Routing Client to IP address of Peripheral

[0703Manjunath]

Ryan ,

you will still be able to know the ip address of the peripheral via
reg-edit of respective peripherals.

Regards
Manjunath

On Fri, Jul 27, 2018 at 4:30 PM, Ryan Burtch <rburtch3 at gmail.com> wrote:

> I work in Managed Services.  I have to get into different customer
> environments when issues happen. Many times, I'm researching a dropped call
> or something like that via the AW/HDS.
>
>
>
> I see the calls come into RCD/TCD via some Routing Client '5001, 5002,
> etc', but I need a way to correlate these routing clients to the actual
> peripheral's IP ADDRESS (CVP1,2,3, CUCM, etc.)
>
>
>
> I know I can get this from PG setup, but I can't take the environment down
> when I'm troubleshooting, plus I have no idea which PG to pull from as many
> of these environments are quite large.
>
>
>
> Is there any other way to get this info quickly?  Thoughts.
>
>
>
>
> Sincerely,
>
> Ryan Burtch
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 


Thanks & Regards
   Manjunath
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180727/80dbce84/attachment.html>