[cisco-voip] route calls to VM after sending to Route list

[Scott Voll]

if the call goes from pattern to route list, add to the Route List the next
place for it to go.

else, use your UCCX and on transfer you have some options there to use.

Not sure of your exact problem, but those come to mind.

scott


On Tue, Mar 6, 2018 at 9:57 AM, Carlo Calabrese via cisco-voip <
cisco-voip at puck.nether.net> wrote:

> I have a problem where I send a call to a route pattern, route list. if I
> get a busy signal, I want to send the call to voice mail or have UCCX pick
> it up.
> I have tried to use the same pattern with different partitions but
> it never goes to the second partition.
>
> I did this years ago but can't remember how and that was 8.5
>
> Thanks
>
> Carlo
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180306/f6ef8133/attachment.html>