[cisco-voip] Cisco ATA Devices need reset

[Hunter Fuller]

For our VG202 and VG204s we are using 802.3at to 12V adapters (
https://www.amazon.com/GAT-USBC-Convert-802-3at-Macbook-Converts/dp/B07D7HYWQF/ref=sr_1_14?ie=UTF8&qid=1537393314&sr=8-14&keywords=802.3at%2B12V&th=1)
to convert them to PoE. This problem happens pretty infrequently but now we
have an easy solution. Unfortunately the barrel jack is the wrong pitch so
we have to hack the cables apart and solder the right barrel together. But
at least that's only painful one time.

On Wed, Sep 19, 2018 at 2:13 PM Pawlowski, Adam <ajp26 at buffalo.edu> wrote:

> On the ATA-186, any time we did maintenance work on the UCM or CM service.
> They are pretty weak sauce and seem to just give up trying to operate.
>
>
>
> You don’t have to physically go to these though, I just go to the admin
> page and touch something like the TFTP config line or whatever and it will
> eventually come back to life and re-register itself.
>
>
>
> Have not had this problem with the ATA-187 or ATA-190.
>
>
>
> We DO have this problem with the VG320 and VG340, SCCP- they’ll fall off
> due to a network outage and then never bother to come back and re-register
> no matter how I configure the “retry” parameter.
>
>
>
> Adam Pawlowski
>
> SUNAB
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-- 

--
Hunter Fuller
Network Engineer
VBH Annex B-5
+1 256 824 5331

Office of Information Technology
The University of Alabama in Huntsville
Systems and Infrastructure
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180919/87169e1b/attachment.html>