[e-nsp] Best practice new hardware deployment

[Andraz Sraka]

Hello,

I just go myself new refurbished Extreme Blackdiamond 6808. Are there
any best practices how to test and diagnose hardware, besides running
'show diagnostic ..' ? What are things that needed to be carefully
checked?

Chassis  : 801000-00-07 0018F-07874 CLEI:           QC:      
Backplane: 701000-00-05 0012H-03435
MSM    A : 701021-00-20 0003F-00673 CLEI:           QC:       CP:05
MSM    B : 701021-00-21 0123F-02918 CLEI:           QC:       CP:05
SLOT   1 : 701026-00-15 0023F-25643 CLEI:           QC:       CP:04
SLOT   2 : 701026-00-15 0025F-33067 CLEI:           QC:       CP:04
SLOT   3 : 701020-00-14 0023F-24363 CLEI:           QC:       CP:03
SLOT   4 : 701020-00-19 0022F-22303 CLEI:           QC:       CP:03
SLOT   5 : 
SLOT   6 : 
SLOT   7 : 701026-00-11 0227F-70480 CLEI:           QC:       CP:04
SLOT   8 : 701026-00-11 0223F-70917 CLEI:           QC:       CP:04

Image : Extremeware  Version 7.3.2.3 [non-ssh] [wlan] by Release_Master
on 02/21/05 17:54:52

BootROM : 8.2


Also is there any good/secure practice how to start configuration? Like
Junos/cisco security templates .. 

Thanks,
 Andraz



-- 
Humppa all the way!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/extreme-nsp/attachments/20091221/bec45b31/attachment.bin>