[f-nsp] Problems getting OSPF running

[Scott Weeks]

What does "sho ip ospf config" show?

scott


On Mon, 12 Apr 2004, Dan Norton wrote:

:  Thanks, I tried that first actually and still no luck. It seems like I'm missing something. According to the foundry OSPF is running but it's not showing any LSAs received.
:
:  Dan Norton
:  Network Administrator
:
:  WareNet
:  dan at ware.net
:  (949) 417 - 2300 x 2360
:  (888) 927 - 3329 (Fax)
:  Emergency Cell Phone: 949-300-4215
:  WebSite Development, Web Hosting, Connectivity, Colocation
:  aim: deveyn
:
:
:
:  -----Original Message-----
:  From: Scott Weeks [mailto:sweeks at sandiego.edu]
:  Sent: Monday, April 12, 2004 8:02 AM
:  To: Dan Norton
:  Cc: foundry-nsp at puck.nether.net
:  Subject: Re: [f-nsp] Problems getting OSPF running
:
:
:
:
:  Hello Dan and Everyone!
:
:  Try:
:     router ospf
:      area 0
:     !
:     interface e4/1
:      ip ospf area 0
:
:
:  instead of:
:     interface e 4/1
:      ip ospf area 0.0.0.0
:     !
:     router ospf
:      area 0.0.0.0
:
:  scott
:
:
:
:  On Fri, 9 Apr 2004, Dan Norton wrote:
:
:  :  I have an all Cisco network and am adding a BigIron 4000 to the mix. I
:  :  have read the manual and implemented OSPF but can't get it to load the
:  :  routes from the neighbor routers.
:  :
:  :  It cannot actually see the routers at all and is not showing any LSAs
:  :  being received.
:  :
:  :  my config:
:  :
:  :  interface e 4/1
:  :   ip address my.ip.add.ress 255.255.255.128
:  :   ip ospf area 0.0.0.0
:  :   ip ospf cost 1
:  :  !
:  :  !
:  :  !
:  :  !
:  :  router ospf
:  :   area 0.0.0.0
:  :
:  :
:  :  Am I missing something obvious here? When I do a show ip ospf neighbors
:  :  it has nothing and a show ip ospf routes only shows the locally assigned
:  :  subnet.
:  :
:  :  Thanks.
:  :
:  :
:  :
:  :
:  :  Dan Norton
:  :
:  :
:  :
:  :
:
: