[f-nsp] Problems getting OSPF running

[Brent Van Dussen]

Maybe you need to have a router-id specified?  That may only be for BGP 
though, worth a shot ;)

ip router-id loop.back.add.ress

-Brent


At 08:58 AM 4/12/2004, Dan Norton wrote:
>Thanks, I tried that first actually and still no luck. It seems like I'm 
>missing something. According to the foundry OSPF is running but it's not 
>showing any LSAs received.
>
>Dan Norton
>Network Administrator
>
>WareNet
>dan at ware.net
>(949) 417 - 2300 x 2360
>(888) 927 - 3329 (Fax)
>Emergency Cell Phone: 949-300-4215
>WebSite Development, Web Hosting, Connectivity, Colocation
>aim: deveyn
>
>
>
>-----Original Message-----
>From: Scott Weeks [mailto:sweeks at sandiego.edu]
>Sent: Monday, April 12, 2004 8:02 AM
>To: Dan Norton
>Cc: foundry-nsp at puck.nether.net
>Subject: Re: [f-nsp] Problems getting OSPF running
>
>
>
>
>Hello Dan and Everyone!
>
>Try:
>    router ospf
>     area 0
>    !
>    interface e4/1
>     ip ospf area 0
>
>
>instead of:
>    interface e 4/1
>     ip ospf area 0.0.0.0
>    !
>    router ospf
>     area 0.0.0.0
>
>scott
>
>
>
>On Fri, 9 Apr 2004, Dan Norton wrote:
>
>:  I have an all Cisco network and am adding a BigIron 4000 to the mix. I
>:  have read the manual and implemented OSPF but can't get it to load the
>:  routes from the neighbor routers.
>:
>:  It cannot actually see the routers at all and is not showing any LSAs
>:  being received.
>:
>:  my config:
>:
>:  interface e 4/1
>:   ip address my.ip.add.ress 255.255.255.128
>:   ip ospf area 0.0.0.0
>:   ip ospf cost 1
>:  !
>:  !
>:  !
>:  !
>:  router ospf
>:   area 0.0.0.0
>:
>:
>:  Am I missing something obvious here? When I do a show ip ospf neighbors
>:  it has nothing and a show ip ospf routes only shows the locally assigned
>:  subnet.
>:
>:  Thanks.
>:
>:
>:
>:
>:  Dan Norton
>:
>:
>:
>:
>
>
>_______________________________________________
>foundry-nsp mailing list
>foundry-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/foundry-nsp