[f-nsp] found a null0 route bug?
Erich Hohermuth
eh at solnet.ch
Wed Jun 6 04:12:24 EDT 2007
Hi Daniel,
I did the same test on a XMR running 3300a and I didn't had the same
problem.
I configured a VE interface with a /29 and later i put a static /32
route in place. The CAM Table was fine afterwards. Maybe the problem
occours if the VE Interface makes a up/down change ? Unfortunately I
could not test this ...
Regards
Erich
> ip route 192.168.0.100/32 null0
> Destination Gateway Port Cost Type
> 1 192.168.0.100/32 DIRECT drop 1/1 S
> Slot Index IP_Address MAC Age VLAN Out Port
> 1 0x017ed(L) 192.168.0.100/32 000c.2957.8593 2 172 1/11
> 1 0x4dd6a(R) 192.168.0.100/32 N/A Dis N/A Drop
>
--
* Erich Hohermuth IP Engineer - SolNet (AS 9044) PGPKEY-46A08FCB *
* phone: +41 32 517 6220 / sip:9044*463 at inoc-dba.pch.net *
More information about the foundry-nsp
mailing list