[f-nsp] Failing Backplane or Interface Module on a FastIron 800...help is greatly appreciated.

[Nicolaj Kamensek]

Jason J. W. Williams wrote:

Hi Jason,

> Any help in eliminating the backplane as a possibility would really be
> appreciated. Also, I have some IronCore 24-port blades from our old
> FastIron II. Could I put those into my two empty slots on the FI800 to
> take over for the "bad" blade until I can get it replaced? If so, does
> it require a chassis reboot to do that (should the chassis be off)?

no, you cannot mix Ironcore and JetCore modules.

Regards,
Nico