[f-nsp] Foundry and Cisco UDLD different?

[Christian Bering]

Hi all,

Googling the archives I haven't been able to come up with an answer to subj. 

I am unable to establish UDLD between a Cisco 7600 and a Foundry MLX. I have tried setting the Foundry values to what I think is default on Cisco, but with no luck:

SSH at dr1.nybf#show link-keep
Total link-keepalive enabled ports: 1
Keepalive Retries: 5    Keepalive Interval: 7 * 100 MilliSec.

Port    Physical Link   Link-keepalive  Logical link   
1/3     up              down            down           


cr1.hors#show udld tenGigabitEthernet 4/1 

Interface Te4/1
---
Port enable administrative configuration setting: Enabled
Port enable operational state: Enabled
Current bidirectional state: Unknown
Current operational state: Advertisement
Message interval: 7
Time out interval: 5
No neighbor cache information stored

Are they incompatible or am I just using wrong values?

Thanks,

Christian Bering
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20080107/443a0298/attachment.html>