[f-nsp] Fwd: Multicasting config example?

debbie fligor fligor at illinois.edu
Tue Feb 24 11:02:49 EST 2009


I hadn't meant to take this off list. In case someone else is  
following along and having fun with multicast on the MLXs, here's what  
I sent yesterday.

Begin forwarded message:

> From: debbie fligor <fligor at illinois.edu>
> Date: February 23, 2009 15:09:06 CST
> To: Bjørn Skovlund Rydén <BSR at fullrate.dk>
> Cc: debbie fligor <fligor at illinois.edu>
> Subject: Re: [f-nsp] Multicasting config example?
>
> For multicast between subnets to work you need more info than you'll  
> find in the MLX config guides (IMO).
>
> Some of this you might have done, but here's the steps:
>
> globally enable ip multicast-routing.  reboot even if it doesn't  
> tell you to.  turn on pim routing
>
> tell pim routing to use your favorite mix of routes in what order.   
> we do multicast specific, unicast specific, multicast default, and  
> unicast default, in that order.   our default leaves campus though,  
> and multicast leaves in a different path than unicast does.  If your  
> multicast and unicast networks are identical, it's not too important  
> which order is setup.
>
> Pick an IP address to be your RP.  preferably one on a loopback so  
> it's not tied to a specific subnet or device.  set that to be the RP  
> candidate on the MLX it's configured on.  Tell all the MLXs that is  
> the RP address. you can use BSR, but best practice is currently to  
> hard code it and not use BSR.
>
> Then make sure you've got ip pim-sparse set on the ve for the vlan,  
> as well as the routed interface and the loopback that is the RP and  
> all the routing links between the two boxes.
>
>
> so for the device that's the RP here's an example bit of config:
>
>
> ip multicast-routing
>
> router pim
> route-precedence mc-non-default uc-non-default mc-default uc-default
>
> interface loopback 2
> port-name RP for on-campus
> ip ospf area 0
> ip address 130.126.0.145/32
> ip pim-sparse
>
> router pim
> rp-address 130.126.0.145
> rp-candidate loopback 2
> !
> interface ve 3502
> port-name uiuc-core1-dist11-lnk
> ip ospf area 0
> ip address 172.20.20.5/30
> ip pim-sparse
> ip mtu 9000
> !
>
>
> and then here's the config bits on distribution devices that matter  
> for getting things between the MLXs and to the user networks.
>
>
> router pim
> route-precedence mc-non-default uc-non-default mc-default uc-default
>
> router pim
> rp-address 130.126.0.145
>
>
> interface ve 3502
> port-name uiuc-core1-dist11-lnk
> ip ospf area 0
> ip address 172.20.20.6/30
> no ip redirect
> ip pim-sparse
>
> interface ve 499
> port-name uiuc-test2wireless-net
> ip ospf area 1
> ip ospf passive
> ip address 192.17.201.1/24
> no ip redirect
> ip helper-address 128.174.45.8
> ip pim-sparse
>
>
>
> If this wasn't enough detail, let me know what questions you still  
> have.  Some weeks we feel like we are Foundry's only multicast QA  
> department.
>
> I almost forgot, you want to be running something really current  
> like 3.9.00a or later for them to have fixed most of the multicast  
> bugs.
>
> -debbie
>
>
> On Feb 23, 2009, at 14:45, Bjørn Skovlund Rydén wrote:
>
>> Hi everyone,
>>
>> Sorry to bother you for this, but my technical friend at Foundry  
>> seems to have gone on vacation for a few weeks, and I’d like to get  
>> on with this.
>>
>> We’re running a mesh of 6 MLX’s with distribution rings based on  
>> FES/FESX. I’m now starting to look at multicasting and having read  
>> back and forth in the config-guide, I’m still a bit clueless as to  
>> how to get the simplest thing to work.
>>
>> I would like to receive multicast traffic on a VLAN on MLX A and  
>> have recipient on MLX B on a routed interface. Very basic stuff,  
>> I’d say, but after a day in the test-lab, I’m still not successful : 
>> ( So can someone give me the most basic configuration example on  
>> how to do this?
>>
>> Kind regards,
>> Bjørn
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
> -----
> -debbie
> Debbie Fligor, n9dn       Network Engineer, CITES, Univ. of Il
> email: fligor at illinois.edu          <http://www.uiuc.edu/ph/www/ 
> fligor>
>                   "My turn."  -River Tam
>
>
>
>
>

-----
-debbie
Debbie Fligor, n9dn       Network Engineer, CITES, Univ. of Il
email: fligor at illinois.edu          <http://www.uiuc.edu/ph/www/fligor>
                    "My turn."  -River Tam








More information about the foundry-nsp mailing list