[f-nsp] Unrecognized command

[Samit]

Hi,

Spend half  day without a luck to do a basic configuration of TCS in
pure L2 environment in my recently arrived ServerIronGT EGx2.

I am following this guide

http://www.foundrynetworks.co.jp/services/documentation/siug/ServerIron_Cache_Switching.html#5936

Along with ServerIron_10200_xxxx Guides..

But I am stuck here...with "Unrecognized command" so cannot move forward...


ServerIron(config)#ip address

Unrecognized command

ServerIron(config)#ip address

Unrecognized command

ServerIron(config)#ip de

  default-network       Configure default network route

ServerIron(config)#ip default-gate

Unrecognized command

ServerIron(config)#ip default-gate

Unrecognized command

ServerIron(config)#ip po.

Unrecognized command

ServerIron(config)#ip poli

  policy                Enable policy routing

ServerIron(config)#ip policy

  prefer-direct-route   Use direct route preference

  route-map             Policy route map

ServerIron(config)#ip policy 2 ca

Unrecognized command

ServerIron(config)#ip policy 2 cache

Unrecognized command

ServerIron(config)#

ServerIron#sh ver

  SW: Version 10.2.01cTD4 Copyright (c) 1996-2007 Foundry Networks, Inc.

      Compiled on Sep 04 2008 at 19:17:10 labeled as WXR10201c

  HW: ServerIronGT E-1 Router, SYSIF version 21, Serial #: Non-exist

==========================================================================

SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE

      Serial #:   CH50050124

    0 MB SHM, 1 Application Processors

16384 KB BRAM, SMC version 5, BM version 21

  SW: (1)10.2.01cTF2

==========================================================================

SL 2: J-BxG JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC)

      Serial #:   PR13021751

 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89

32768 KB PRAM and 2M-Bit*1 CAM for IGC  4, version 0449

32768 KB PRAM and 2M-Bit*1 CAM for IGC  5, version 0449

==========================================================================

Active management module:

  1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus

  512 KB boot flash memory

16384 KB code flash memory

  512 KB SRAM

  512 MB DRAM

The system uptime is 3 hours 24 minutes 6 seconds


Really appreciate if anyone can shed some light in this and help me with
some tips to configure the TCS.

Lan/Router<-->ServerIronGT<-->Wan/Router
			   |
		Web Proxy Farm


Regards,
Samit