[f-nsp] VIPs on multiple subnets

[Gerald Krause]

Am 12.03.11 06:36, schrieb Tom Banner:
> I'm running an si450 with router code (boot image 10.2) and can't get VIPs on multiple subnets to work.
> 
> I have 3 default networks defined (ip default-network). One /24 and two /29 networks. I also have a default route for the /24 defined. 

Working with more then one static "default route" or "default network"
is always a bad thing in my opinion, because L3 routing has better ways
for using multiple IP networks. In your situation, I would remove all
the 3 "ip default-network" statements and leave only the "default route"
for the /24 alive. If that doesn't work, ensure that the two /29s are
being *routed* towards your SI IP address from your uplink gateway.

--
Gerald