[f-nsp] Cam Partition Issue with Bi-RX

[Dave Peters]

My bad.  The chassis is running MLX code, obviously, and it's 05100c.

Any takers on why I'm not seeing the cam stats?

Thanks again.

On 5/12/2011 11:36 AM, Dave Peters wrote:
> Hi all--
>
> I've got a BI-RX-4 running the latest code, 2.703a, with an RX-BI24C 
> on it, and when I rconsole onto the blade to look at the cam 
> partition, I'm seeing zero entries, like so:
>
> LP-1>show cam ip 24 stat
> CAM IP statistics:      free entries    total entries
>            level1:      0              0
>
> Did it because I was experiencing some dropped packets.  A config 
> tweak seemed to fix that, but I feel like I should still see something 
> in the cam stats, since I've got traffic running through the card 
> continuously.  Is there something I'm missing?  Is this a software 
> bug, or am I using this command improperly?
>
> Thanks much for your help.
>
>
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp


-- 
Dave Peters
Technical Director
Terabit Systems
2565 3rd Street  #218
San Francisco, CA  94107

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20110512/7da540f0/attachment.html>