[f-nsp] Show SNMP community string configured on FastIron

[Robert Hass]

Hi
Is any way to display currently configured community string on FastIron ?

I cannot display them. There is also no command like 'no service
password-encryption'

It's ICX 6450 running FastIron software 7.4.00a.

ICX6450-24 Router#show snmp server

      Contact:
     Location:
Community(ro): .....


Traps
                   Cold start: Enable
                      Link up: Enable
                    Link down: Enable
               Authentication: Enable
           MAC Authentication: Enable
     Locked address violation: Enable
         Power supply failure: Enable
                  Fan failure: Enable
                   Metro ring: Enable
              Module inserted: Enable
               Module removed: Enable
          Temperature warning: Enable
                 STP new root: Enable
          STP topology change: Enable
                         ospf: Enable
                          bgp: Enable
                         vrrp: Enable
                        vrrpe: Enable
                         vsrp: Enable
                Holddown time: 60

 Total Trap-Receiver Entries: 0
ICX6450-24 Router#sh run | inc snmp
snmp-server community ..... ro

Rob