[f-nsp] Enabling ipv6 on J-BxGMR4

[Nick Gray]

Greetings,

I am having issues enabling ipv6 on a foundry bi8000 with J-BxGMR4
management modules.

#show version
  SW: Version 08.0.01wT53 Copyright (c) 1996-2004 Foundry Networks, Inc.
      Compiled on Jun 18 2010 at 15:16:32 labeled as B2R08001w
      (3860139 bytes) from Primary B2R08001w.bin
  HW: BigIron 8000 Router, SYSIF version 21, Serial #: Non-exist
==========================================================================
SL 1: J-BxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), M4, ACTIVE
      Serial #:   xxxx
 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
32768 KB PRAM and 2M-Bit*1 CAM for IGC  0, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC  1, version 0449
==========================================================================
SL 2: J-BxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), M4, STANDBY
      Serial #:   xxxx
 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
32768 KB PRAM and 2M-Bit*1 CAM for IGC  4, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC  5, version 0449
==========================================================================
SL 3: B2x10G Fiber Switch Module, SYSIF 2
      Serial #:   xxxx
32768 KB BRAM, XPP version 88, XTM version 89
 4096 KB PRAM(4096K+0K) and 65536*1 CAM entries for DMA  8, version 0158
 4096 KB PRAM(4096K+0K) and 65536*1 CAM entries for DMA  9, version 0158
==========================================================================

When I try to run ipv6 unicast-routing the command is not accepted:
(config)#ipv6 unicast-routing
Invalid input -> ipv6 unicast-routing
Type ? for a list

This usually reflects an unsupported feature. Do you know where I
could get an update bin file that supports IPv6 in the event it is not
supported?

Thanks for your help as usual!

Nick