[f-nsp] Enabling ipv6 on J-BxGMR4

Mischa Peters foundry at high5.nl
Thu Feb 16 04:29:56 EST 2012


Hi Nick,

You will need a B2P image for IPv6.

Mischa


On Feb 16, 2012, at 06:30 , Nick Gray wrote:

> Greetings,
> 
> I am having issues enabling ipv6 on a foundry bi8000 with J-BxGMR4
> management modules.
> 
> #show version
>  SW: Version 08.0.01wT53 Copyright (c) 1996-2004 Foundry Networks, Inc.
>      Compiled on Jun 18 2010 at 15:16:32 labeled as B2R08001w
>      (3860139 bytes) from Primary B2R08001w.bin
>  HW: BigIron 8000 Router, SYSIF version 21, Serial #: Non-exist
> ==========================================================================
> SL 1: J-BxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), M4, ACTIVE
>      Serial #:   xxxx
> 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  0, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  1, version 0449
> ==========================================================================
> SL 2: J-BxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), M4, STANDBY
>      Serial #:   xxxx
> 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  4, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  5, version 0449
> ==========================================================================
> SL 3: B2x10G Fiber Switch Module, SYSIF 2
>      Serial #:   xxxx
> 32768 KB BRAM, XPP version 88, XTM version 89
> 4096 KB PRAM(4096K+0K) and 65536*1 CAM entries for DMA  8, version 0158
> 4096 KB PRAM(4096K+0K) and 65536*1 CAM entries for DMA  9, version 0158
> ==========================================================================
> 
> When I try to run ipv6 unicast-routing the command is not accepted:
> (config)#ipv6 unicast-routing
> Invalid input -> ipv6 unicast-routing
> Type ? for a list
> 
> This usually reflects an unsupported feature. Do you know where I
> could get an update bin file that supports IPv6 in the event it is not
> supported?
> 
> Thanks for your help as usual!
> 
> Nick
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp




More information about the foundry-nsp mailing list