[f-nsp] Enabling ipv6 on J-BxGMR4

[Jeroen Oldenhof]

Hi Nick,

you have B2Rxxx software running, which is the (R)outer image. IPv6 is 
only available with the B2Pxxx, the (P)rovider image.

Best regards,
Jeroen Oldenhof



Op 16-2-2012 6:30, Nick Gray schreef:
> Greetings,
>
> I am having issues enabling ipv6 on a foundry bi8000 with J-BxGMR4
> management modules.
>
> #show version
>    SW: Version 08.0.01wT53 Copyright (c) 1996-2004 Foundry Networks, Inc.
>        Compiled on Jun 18 2010 at 15:16:32 labeled as B2R08001w
>        (3860139 bytes) from Primary B2R08001w.bin
>    HW: BigIron 8000 Router, SYSIF version 21, Serial #: Non-exist
> ==========================================================================
> SL 1: J-BxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), M4, ACTIVE
>        Serial #:   xxxx
>   4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  0, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  1, version 0449
> ==========================================================================
> SL 2: J-BxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), M4, STANDBY
>        Serial #:   xxxx
>   4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  4, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC  5, version 0449
> ==========================================================================
> SL 3: B2x10G Fiber Switch Module, SYSIF 2
>        Serial #:   xxxx
> 32768 KB BRAM, XPP version 88, XTM version 89
>   4096 KB PRAM(4096K+0K) and 65536*1 CAM entries for DMA  8, version 0158
>   4096 KB PRAM(4096K+0K) and 65536*1 CAM entries for DMA  9, version 0158
> ==========================================================================
>
> When I try to run ipv6 unicast-routing the command is not accepted:
> (config)#ipv6 unicast-routing
> Invalid input ->  ipv6 unicast-routing
> Type ? for a list
>
> This usually reflects an unsupported feature. Do you know where I
> could get an update bin file that supports IPv6 in the event it is not
> supported?
>
> Thanks for your help as usual!
>
> Nick
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp