[f-nsp] telnet issue on multiple Foundry switches

[Joseph Jackson]

Do the switches reply to pings?


On 05/29/2012 09:31 PM, aaron at wholesaleinternet.net wrote:
> Hello all,
>
> I'm having a strange issue when I try to telnet into a few of my foundry
> switches.  The switches will refuse the connections.
>
> I originally had this issue with two 4802s.  I thought the problem was due
> to bad switchs but then the issue popped up on an MG8 and an RX4.
>
> If I stop and restart the telnet service from the console they will accept
> telnet connections for about 5 minutes, then start refusing them again.
> show telnet shows no active sessions and the CPUs are not overloaded. Logs
> are clear.
>
> Has anyone experienced this before and knows a solution?  Is this a known
> issue I need to look out for?  Any advise is appreciated.
>
> Aaron
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp