[f-nsp] telnet issue on multiple Foundry switches

[aaron at wholesaleinternet.net]

Thanks for the reply.

Yes.  They reply to pings and forward traffic just fine.  SNMP and SFLOW
still work also.

Aaron


> Do the switches reply to pings?
>
>
> On 05/29/2012 09:31 PM, aaron at wholesaleinternet.net wrote:
>> Hello all,
>>
>> I'm having a strange issue when I try to telnet into a few of my foundry
>> switches.  The switches will refuse the connections.
>>
>> I originally had this issue with two 4802s.  I thought the problem was
>> due
>> to bad switchs but then the issue popped up on an MG8 and an RX4.
>>
>> If I stop and restart the telnet service from the console they will
>> accept
>> telnet connections for about 5 minutes, then start refusing them again.
>> show telnet shows no active sessions and the CPUs are not overloaded.
>> Logs
>> are clear.
>>
>> Has anyone experienced this before and knows a solution?  Is this a
>> known
>> issue I need to look out for?  Any advise is appreciated.
>>
>> Aaron
>>
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>