[f-nsp] Rolling Stack Upgrade

[Frank Bulk]

It's unfortunate that Brocade doesn't support this - it would be a huge plus
for MC-LAG configurations.

 

Frank

 

From: salman sadiq [mailto:salmanravian at gmail.com] 
Sent: Sunday, December 22, 2013 11:04 PM
To: Frank Bulk
Cc: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] Rolling Stack Upgrade

 

Hi Frank,

          I agree with you. It seems Brocade doesn't have a similar feature.
I think even in Cisco RSU has been recently introduced. However, it is a
vital feature for stacks. Perhaps stacks are only intended to offer
increased port density not full redundancy.

BR

Salman

 

On Mon, Dec 23, 2013 at 8:58 AM, Frank Bulk <frnkblk at iname.com
<mailto:frnkblk at iname.com> > wrote:

I suspect there's no rolling stack upgrade support.  It's been something
I've been asking for on the ICX6610's, too.

 

Regards,

 

Frank

 

From: foundry-nsp [mailto:foundry-nsp-bounces at puck.nether.net
<mailto:foundry-nsp-bounces at puck.nether.net> ] On Behalf Of salman sadiq
Sent: Sunday, December 22, 2013 10:42 PM
To: foundry-nsp at puck.nether.net <mailto:foundry-nsp at puck.nether.net> 
Subject: [f-nsp] Rolling Stack Upgrade

 

Dear Experts,

                 We have Brocade FCX stacks in our DC running 7.2. The plan
is to upgrade them to 7.4x release but without an outage. Is there anything
similar to rolling stack upgrade in Brocade? I believe a similar feature is
there for Cisco switches.

BR

Salman

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131222/da140564/attachment.html>