[f-nsp] SX-FI-2XG with IPv4?

[Matt Kassawara]

The SX-FI-2XG is a third generation module which requires 7.3.

On Mon, Jan 7, 2013 at 12:46 PM, Dave Peters - Terabit Systems
<Dave at terabitsystems.com> wrote:
> I’ve got one of the above blades, new to me, and I can’t get it recognized
> in SX-FI2XGMR4 (SX-1600 chassis) running SXS7202g.  An IPv6 management
> recognizes the card fine.  IPv4, no.
>
>
>
> Hot-insertion gives me this: Unknown module id: 0x6c
>
>
>
> Looked through the literature, couldn’t find anything.  Anyone seen this?
>
>
>
> Thanks much.
>
>
>
> --Dave Peters
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp