[f-nsp] Management card does not respond to telnet and SNMP

[Matt Kassawara]

I haven't seen this problem before on my MLXe chassis.  If you have a
second management module, run "switchover" and then re-seat the
malfunctioning module.  Otherwise, the "reset" command or re-seating
the malfunctioning module should work without rebooting the chassis.

On Fri, Jan 18, 2013 at 3:07 AM, Alexander Shikoff
<minotaur at crete.org.ua> wrote:
> Hello!
>
> This morning my Brocade MLXe-16 with BR-MLX-MR2-M Management Module
> (sofware version is NetIron 5.02b) stopped responding telnet and SNMP
> requests.
>
> Management interface replies to ICMP echo request though.
> I thought it might be memory leak but there is enough memory:
> ====================================================================
> NetIron MLX active MP slot 33:
> Total SDRAM         :  2147483648 bytes
> Available Memory    :  1857908736 bytes
> Available Memory (%):          86 percent
> Free Physical Pages :      443649 pages
>
> Malloc statistics: total  6912475
> OS malloc count:          59728132
> OS malloc fail:                  0
> OS free count:            59717863
> OS free fail:                    0
> diff:                        10269
>
> Has anyone expirienced such problem ?
> I need to fix it without chassis reboot. If I issue "reset" CLI
> command will line cards stay functioning properly?
>
> Thanks in advance.
>
> --
> MINO-RIPE
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp