[f-nsp] Management card does not respond to telnet and SNMP

[Alexander Shikoff]

Hi,

On Fri, Jan 18, 2013 at 07:41:23AM -0700, Matt Kassawara wrote:
> I haven't seen this problem before on my MLXe chassis.  If you have a
> second management module, run "switchover" and then re-seat the
> malfunctioning module.  Otherwise, the "reset" command or re-seating
> the malfunctioning module should work without rebooting the chassis.
It's too late... :(
After issuing 'show chassis' command Management Module totally hung.
We opened TAC case, but I'm afraid that physical removing and insertion
it back is the only way. :(
 
> On Fri, Jan 18, 2013 at 3:07 AM, Alexander Shikoff
> <minotaur at crete.org.ua> wrote:
> > Hello!
> >
> > This morning my Brocade MLXe-16 with BR-MLX-MR2-M Management Module
> > (sofware version is NetIron 5.02b) stopped responding telnet and SNMP
> > requests.
> >
> > Management interface replies to ICMP echo request though.
> > I thought it might be memory leak but there is enough memory:
> > ====================================================================
> > NetIron MLX active MP slot 33:
> > Total SDRAM         :  2147483648 bytes
> > Available Memory    :  1857908736 bytes
> > Available Memory (%):          86 percent
> > Free Physical Pages :      443649 pages
> >
> > Malloc statistics: total  6912475
> > OS malloc count:          59728132
> > OS malloc fail:                  0
> > OS free count:            59717863
> > OS free fail:                    0
> > diff:                        10269
> >
> > Has anyone expirienced such problem ?
> > I need to fix it without chassis reboot. If I issue "reset" CLI
> > command will line cards stay functioning properly?
> >
> > Thanks in advance.
> >
> > --
> > MINO-RIPE
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/foundry-nsp

-- 
MINO-RIPE