[f-nsp] Management card does not respond to telnet and SNMP

[Rajesh Singh]

Hi,
Which version of RX you are using ?
Regards
Rajesh 

________________________________________
From: foundry-nsp-bounces at puck.nether.net [foundry-nsp-bounces at puck.nether.net] on behalf of aaron at wholesaleinternet.net [aaron at wholesaleinternet.net]
Sent: Friday, January 18, 2013 10:47 PM
To: Alexander Shikoff
Cc: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] Management card does not respond to telnet and SNMP

We've had this happen on 2 RX's and an MG8.

On one of the RXs it allows only 2 telnet sessions at a time.  Even though
it's set for 5.  A reboot fixes this but it comes back later.  I don't
know how to fix it without a reboot.



> Hello!
>
> This morning my Brocade MLXe-16 with BR-MLX-MR2-M Management Module
> (sofware version is NetIron 5.02b) stopped responding telnet and SNMP
> requests.
>
> Management interface replies to ICMP echo request though.
> I thought it might be memory leak but there is enough memory:
> ====================================================================
> NetIron MLX active MP slot 33:
> Total SDRAM         :  2147483648 bytes
> Available Memory    :  1857908736 bytes
> Available Memory (%):          86 percent
> Free Physical Pages :      443649 pages
>
> Malloc statistics: total  6912475
> OS malloc count:          59728132
> OS malloc fail:                  0
> OS free count:            59717863
> OS free fail:                    0
> diff:                        10269
>
> Has anyone expirienced such problem ?
> I need to fix it without chassis reboot. If I issue "reset" CLI
> command will line cards stay functioning properly?
>
> Thanks in advance.
>
> --
> MINO-RIPE
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>


_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp

---------------------------------------------------------------------------------------
DISCLAIMER
This message (including any attachments) is confidential and intended solely for the person or organization to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this message in error, please notify us immediately by telephoning or E-mailing the sender. This footnote also confirms that this E-mail message has been scanned for the presence of computer viruses.
---------------------------------------------------------------------------------------
Please consider the environment before printing this email