[f-nsp] IPv6 on FCX

[Mark Price]

Hi all,  thanks for the responses regarding IPv6 routing on FCX.

I did get this working.  One problem I encountered was due to "ip follow"
on my VEs.  In order to activate IPv6 on the VE after adding IPv6 address,
I had to remove "ip follow ve #" and then re-apply "ip follow ve #"

I *think* this may have been caused by configuring ipv6 addresses on the
VEs before "ipv6 unicast-routing" global config was added.


Thanks,

Mark


On Fri, Nov 8, 2013 at 9:13 AM, Matt Kassawara <mkassawara at gmail.com> wrote:

> I'm running 7.3.00a in production and 8.0.01 in the lab... both with IPv6
> working on VEs.  Can you provide the rest of your configuration?
>
> P.S. - For unrelated reasons, I recommend upgrading to at least 8.0.01.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131115/da7e6ac7/attachment.html>