[f-nsp] MLXe - Line Card Swap - Associated Configuration

[Youssef Bengelloun-Zahr]

Hello Josh,

I was wondering the same thig, very interested in any feedbacks.

Best regards.

Y.




2014-03-18 1:26 GMT+01:00 Josh Farrelly <Josh.Farrelly at manukau.ac.nz>:

>  Hi all
>
>
>
> Just wanted to check if anyone knew whether the configuration that's
> already applied to interfaces stays valid after a line card is swapped with
> another.
>
>
>
> In this example I am wanting to swap a "BR-MLX-10Gx24-DM 24-port 10GbE
> Module" with a "NI-MLX-10Gx8-M 8-port 10GbE (M) Module" but I want the
> relevant configuration for each port to stay exactly the same.
>
>
>
> I am assuming so, but thought best to check before proceeding. I can
> assume we'd only run in to issues where moving to a card with less
> interfaces (e.g. as the startup-config was applied, no matching interface
> for eth1/9 on an 8-port card would be found).
>
>
>
> Kind Regards,
>
>
>
> *Josh Farrelly*
>
> *Infrastructure Architect, ICTS.*
>
> Manukau Institute of Technology
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>



-- 
Youssef BENGELLOUN-ZAHR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20140318/a7b6ebe3/attachment.html>