[f-nsp] Showing optical values on FastIron 07.3.00h

[Jörg Kost]

Hello Tim,

thanks for follow-up, someone whispered me a working solution by private mail.

debug system optics

will open up the show-command for not-connected links also:

# show optic 11
 Port  Temperature   Tx Power     Rx Power     Tx Bias Current
+----+-----------+----------+------------+-------------------+
11   47.0078 C   001.8187 dBm -020.7058 dBm   30.200 mA
       Normal       Normal     Low-Alarm      Normal


>From here on,  I will escalate this locally.

Regards
Jörg

On 8 Oct 2019, at 11:14, Tim Warnock wrote:

> What does a show media look like?
>
> A looped on itself? B the wrong port?
>
>> -----Original Message-----
>> From: foundry-nsp [mailto:foundry-nsp-bounces at puck.nether.net] On
>> Behalf Of Jörg Kost
>> Sent: Tuesday, 8 October 2019 7:07 PM
>> To: foundry-nsp <foundry-nsp at puck.nether.net>
>> Subject: [f-nsp] Showing optical values on FastIron 07.3.00h
>>
>> Hello,
>>
>> is there any "hidden" command e.g. on 07.3.00h for printing out optical
>> values, when a link is not fully connected?
>>
>> For example, using the same vendor optic between sites A and B, B shows
>> no TX,RX at all.
>>
>> A:
>>
>> # show optic 11
>> Port  Temperature   Tx Power     Rx Power     Tx Bias Current
>> +----+-----------+----------+------------+-------------------+
>> 11   52.3906 C   000.8022 dBm -011.5676 dBm   30.178 mA
>> Normal       Normal        Normal      Normal
>>
>> # show interfaces ethernet 11 | include up
>> 10GigabitEthernet11 is up, line protocol is up
>> Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual
>> fdx
>>
>> But site B:
>>
>> # show interfaces ethernet 11 | include line
>> 10GigabitEsomthernet11 is down, line protocol is down
>>
>> #show optic 11
>> # (empty line)
>>
>> Regards
>>
>> Jörg
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp