Cleaning

[Mike Shelton]

Just a note to add that I use either "awesome" or "fantastic" cleaners
with a small round type artist brush, soak,wipe/scrub and then wash
with "water" blow dry with air or hair dryer.
And then set on the oven door on low temp for 1 to 2 hours to dry out
all the dampness out. power up slowly with a variac 24 hours later.
severe flux problems need to be cleaned with a good defluxer before
general cleaning.
let's not forget Bahnson Ultrasonic Cleaners also, great for tuning
capacitors.knobs.
No problems!  so far.
Mike Shelton CET.
        ke4lgx
Electronic Technican III
UNC-Chapel Hill
ph:919-962-5475
fax:919-962-0480

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"