Problems w/ SB-300

[Fredric Newman]

GREETINGS TO THE GREEN MACHINE:

     I just received a beautiful SB-300.  It has both the SSB and CW filters
installed and, I'm told by the previous owner, the "Heath mod to permit the
reception of AM using the SSB filter".  I am also told that upon departure
with UPS all functions were checked and working correctly.  The receiver mode
switch is functioning in all positions as though in LSB, also therefore not
changing selectivity when in the CW position.  I don't have a great deal of
time for the fun of troubleshooting at the moment, which is why I bought the
receiver in "mint" condition.  I would greatly appreciate it if  those in the
know would please give me some feedback on where to quickly look to correct
this strange problem.  It's as if the switch is "stuck" in the LSB mode, but
again, I have had no time to check anything out to see if something
disconnected or a tube or component is malfunctioning.  I won't have access
to the receiver until Tuesday evening, as I am flying out of town this
morning until then.  I will be checking my e-mail while away, for as you all
know, these things stay in a prominent place in the mind until solved.
Thanks and to squelch annoyance of anyone for taking up "bandwidth", please
respond direct.  Thank you all in advance.

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --