problems with the sb401

[Ed Richards]

Kevin;
Check your bias supply. If OK, look for an open in series. If none or
low, disconnect the load and if (A) it comes back, look for a short on
the load side, or (B) if it still is wrong, troubleshoot the bias supply.
Regards,
Ed Richards


On Thu, 11 Nov 1999 13:06:30 -0500 kevin smith <kevin-0 at WEBTV.NET>
writes:
> the problem is i got plate voltage but no grid voltage plus no auto
> level control any help on this one?kevin
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe
> heath 'name' 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff
> heath"

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"