SB 101 MIC IMPEDANCE??

[Rob Ellis]

Hi all, I have SSB xmit trouble . Rig was tested ok on
SSB by previous owner whom I know to be reliable.  I
wired up my "flea market" Electro Voice mic per the
book and had about 4-5 watts RF output. I'm suspect
that I have the wrong impedance mic.  What is
considered high impedance? For example I have an old
Yaesu mic that's marked 600 ohm, is that high
impedance?  Your comments appreciated. Rob

=====
"There Is No Better Fun To Be Had Then Sitting In The Radio Shack On A Cold Winter Evening DXing with a Heathkit"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"