HR-10 - HW-16 repair

[Glen Zook]

Remember that the tolerances on the older electrolytic
capacitors were -50 percent and + 100 percent.  The
newer ones are +/- 10 percent to +/- 20 percent.

Thus, you certainly have a lot of "leeway".

Glen, K9STH

--- Larry Knapp <kc8jx at YAHOO.COM> wrote:

Obviously sometimes one cannot find the "exact"
replacement but something close enough (I personally
would go slightly higher) should be OK.


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://www.tempe.gov/archives/HEATH.html