HM-102 Advice

[Brian Wood]

Tell the lucky recipient to apply the "Wood Variable Constant" (in your
case, 5) to get the right reading from a wrong one. I used it successfully
in college to get an A on a lab in which all my answers were off by exactly
two.

Just kidding. GL.

Brian Wood, W0DZ

----- Original Message -----
From: Gary Harmon <gharmon at IDWORLD.NET>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, January 02, 2001 10:28 PM
Subject: HM-102 Advice


> Hello all,
>
> I tested out an extra HM-102 SWR/Power meter today that I am sending in a
> trade and it is not working properly in the Power Output range.  It won't
> calibrate right and only reads 100w when the linear is putting out 500w to
a
> working meter.  I have changed all 4 diodes but done no other checking.
SWR
> functions work properly.
>
> Any helpful thoughts???
>
> Vr,
>
> ==============
> Gary H. Harmon, Jr.
> K5JWK
> 6302 Robin Forest
> San Antonio, TX  78239-3218
> (210) 657-1549
> gharmon at idworld.net
> ===============
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"