Plate caps

Ed Richards k6uuz at JUNO.COM
Fri Jun 1 11:15:53 EDT 2001


When I worked for Motorola and that happened, I would remove all the
solder, use an ice pick to enlarge the hole in the cap, resolder it on
the tube using plenty of heat and solder. Never had a repeat. Good luck.

Ed Richards

On Fri, 1 Jun 2001 16:04:12 -0300 "Charles W. Morehouse"
<w4gbw at BREVARD.NET> writes:
> Hi Folks,
> The plate cap on on of my best 6146A's has come off. Someone
> soldered
> the connector to it. Thinking of using a dab of JB Weld to put it
> back.
> Any better suggestions?
> Wayne;
> W4GBW
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe
> heath 'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff
> heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"




More information about the Heath mailing list