Do crystals stop working?

[Ed Richards]

Check your hetrodyne oscillator test point to see if the oscillator is
running.

Ed Richards

On Tue, 15 May 2001 08:50:44 EDT Craig Buck <K4IA at AOL.COM> writes:
> Like another post, my SB-102 goes deaf.  It is intermittent on 20.
> Sometimes
> when I turn it on, 20 works fine but other times it comes on dead
> leaving me
> to believe this is not a bandswitch problem.  When it happens, there
> are no
> signals and the preselector makes no difference -- just white noise,
> and no
> transmission.  S meter operates normally,  I can hear a rushing
> noise on my
> other receiver when I try to transmit but there is no signal where
> it is
> supposed to be.
>
> Ideas?
>
> Radio K4IA
> Craig Buck
> Fredericksburg, Virginia USA
> QRP ARCI #2550  FISTS #6702 CC 788
> K1 #470
> ----------------------------------------------
> For cheap long distance, 800#s and more
> Tune to <A
> HREF="http://www.ld.net/?bucksavers">http://www.ld.net/?bucksavers
> </A>
> 4.9 cents/min - no monthly fees
>
> Listserver Subscription:listserv at listserv.tempe.gov - "subscribe
> heath 'name' 'call'"
> Listserver Submissions: heath at listserv.tempe.gov
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff
> heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"