SB-LMO drive req. for physical measurements

[Eddy Swynar]

Murray...

If you can come up with a viable, affordable replacement for this "weak
link" in an otherwise unbeatable SB-line-up, you will surely have invented
the proverbial "...better mousetrap"!

Good luck with your research, I'm sure we all encourage it (sliently, or
otherwise!)...

~73~ Eddy VE3CUI - VE3XZ





----- Original Message -----
From: "Multi-Volti Devices (Murray)" <multi-volti at SOFTHOUSE.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Monday, November 12, 2001 11:15 PM
Subject: SB-LMO drive req. for physical measurements


> I have a hunch I want to pursue regarding a source for the friction
> spring/discs used to drive the LMO dial in the various SB rigs.
>
> I do not have access to such a rig. If someone has the means to do some or
> all of the  following physical measurements, I'd appreciate it, and will
> pursue the sourcing research..
>
> Disk diameter
> Disk thickness, if possible to measure
> Thickness of disk 'pair' removed from dial ring.
> Diameter of clearance hole through disk pair (for the screw that mounts
the
> assembly to the short shaft)
>
> Thickness of the metal annular ring in the clear dial.
> Diameter of the metal annular ring in the clear dial.
>
> Scan of a photo showing the installed mechanisms
> Anything you think is relevant I missed in the list above.
>
> Thanks
>
> Murray
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html