SB-101 Mike Jack

[Chuck]

Pin one is the audio and pin two is the key line.
ground to the outside of connector.
The D104 is a good match for the 101
I use one on my HW and SB models and the local
guys around here are tough on bad audio and they
say this one sounds real good.
I added another 22k resistor in the audio line in
parallel with the original which help me get a little
more drive without makeing the microphone sound to
hot.

Chuck
ae4xj at mindspring.com



On Mon, 2001-10-01 at 18:40, David Rogovitz wrote:
> Hi Guys,
>               I have an SB-101 tat works great but I'm at a loss trying
> to determine on the schematic which pin is which on the two pin mike
> jack??? Also,  how well will my D-104 mike drive the SB-101 ?
>
> 73 de David,
> aa2dw,
> aa2dw at amsat.org
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html