HW-101

[Dennis Heikura]

Hi Cal,

For openers use de-oxit and clean all switches and pots.
Especially the band-switch.

73,
Dennis-WB7EGG

========================

At 01:16 AM 3/23/2002 -0600, Cal Barton wrote:
>
>I have two Heathkit HW-101 transceivers that I want to restore.  I am
having the following problems with them:
>
>Unit 1 - power output into dummy load for each bandswitch setting:
>    3.5 - 90 watts
>    7.0 - 45 watts
>    14.0 - 100 watts
>    21.0 - 110 watts
>    28.0 - 50 watts
>    28.5 - no output
>    29.0 - 120 watts
>    29.5 - 120 watts
>What would cause the power out to be down on 7.0 and no output on 28.5?
>
>Unit 2 - receives fine but no transmit at all.  Bias is fine, no output
power.
>
>Any suggestions as to troubleshooting these two units would be greatly
appreciated.
>
>73,  Cal Barton  N5RNL
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.338 / Virus Database: 189 - Release Date: 3/15/02
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?listATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://interactive.tempe.gov/archives/HEATH.html
>
>
>---
>Incoming mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.338 / Virus Database: 189 - Release Date: 3/14/2002
>
-------------- next part --------------

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.338 / Virus Database: 189 - Release Date: 3/14/2002