SB 610

[Jerry Rego]

Thanks to everyone that responded to my email regarding the SB 610.  I did check the output of the Xformer and it is good.  I have one cap that is shorted and two diodes that "check open".  Trying to find parts to replace the .1 @ 1200 VDC.  and a .15 capacitor at 1200 - 2000 VDC.  Any help out there in obtaining these parts.  Will offer a fair price for the Capacitors.  Or you set your own price.  Again thanks to all who responded with all the help I could not go wrong.  Only problem I did not for see was locating the high Voltage windings of the xformer.  They were tucked away in the mass of wiring located in the wire bundle.

Well that helps in my choice of rebuilding the circuit.  Will take the advice as to double the rating of the components.  Again thanks to all and 73  Jerry Rego KE7YG

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html