Removing datak type press-on letters

[Ron]

John King wrote:
> I have a Heath SB 200linear amplifier that someone
> modified band coverage on and replaced band numbers
> with press-on numbers. I want to return the amplifier
> to stock operation and replace the numbers with the
> stock number scheme. As you may know, the panel has
> textured paint as the stock paint.
> 
> Has anyone removed press-on numbers without damaging
> the paint on the panel of the subject gear? If so,
> please share your SUCCESSFUL methods and give me your
> recommendations.  As you may know, the paint is
> textured on the panel.   Also, please give hints on
> re-applying the proper numbers. Thanks and 73, John,
> K5PGW
> 

I have used 'Goo-Gone' to easily remove labels and
stickers (though never stickon letters). It does not
attack plastics or paint (even though I would check
on an unobtrusive corner before use) but dissolves
adhesives quickly. Apply a drop, let sit for 3 minutes,
then wipe off...

-- Ron

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html